Recording Engineering & Production... where we discuss the nuts and bolts of making records better, not just louder and cheaper. Assembled here you will find some of the brightest minds from the creative and scientific world of audio. Here is your chance to participate in discussions concerning the elements of audio production that interest you most. Enjoy.
I have a RODE NTV and its 12 pin connector at the bottom of the mic is starting to wiggle loose. I have found no obvious way to tighten this from the outside so I unscrewed the cap on the bottom of the mic. This revealed two small screws which I removed. Still the mic does not want to open with a reasonable amount of pressure applied. I am uninterested in forcing the issue in fear of causing further damage. Any one have any experience with this.
Thanks-Joe Doyle
BareFoot Studio
Silver City, NM
Members
Search
FAQ
Register
Login
Home
